Qui est en ligne ?
Il y a en tout 14 utilisateurs en ligne :: 1 Enregistré, 0 Invisible et 13 Invités :: 1 Moteur de rechercheOSTINATO
Le record du nombre d'utilisateurs en ligne est de 268 le Lun 03 Juin 2019, 22:34
Derniers sujets
» Four OCEANIS 331 Caractéristiquespar PIGAWANNE Aujourd'hui à 10:46
» Panneau électrique
par cocoben Jeu 25 Avr 2024, 18:33
» Océanis Med 8 édition 2024
par Vogalen Lun 22 Avr 2024, 21:47
» MPPT Victron 100/30
par MROY Lun 22 Avr 2024, 17:52
» Embouts barres fleches Océanis 423
par jeanpaul Dim 21 Avr 2024, 17:24
» Frein inopérant sur la barre à roue Lewmar de mon Oceanis 35.1
par ABSCONDER Dim 21 Avr 2024, 17:07
» Humidité dans l'afficheur IS20 vent
par sextant Dim 21 Avr 2024, 11:32
» Restauration plan de travail taché
par jeanpaul Dim 21 Avr 2024, 09:20
» passes coque
par CapCool Sam 20 Avr 2024, 19:16
» Code promo autiboutique
par WALLY Sam 20 Avr 2024, 18:11
» [Howto] Retour d'expérience - Installation de batterie Lithium fer phosphate (LIFEPO4)
par jeanpaul Ven 19 Avr 2024, 16:02
» Pièces détachées capot descente
par JMV34 Mar 16 Avr 2024, 17:03
» Vis sans fin cassé mat enrouleur OCEANIS 41.1
par Y2 Mar 16 Avr 2024, 16:41
» Presentation Guy - Oceanis 37 Tauranga
par Jonathan « mea » Dim 14 Avr 2024, 15:23
» Présentation Papagayo
par Jonathan « mea » Dim 14 Avr 2024, 15:22
Rechercher
Pilote b&g Network NO SPD
2 participants
Page 1 sur 1
Pilote b&g Network NO SPD
Bonjour,
avez-vous la solution pour que le pilote b&g Network (APC2) ne se mette pas en "NO SPD" quand le speedo est à 0 (Speedo bloqué ou en dessous de 1,5nd)!
Merci.
avez-vous la solution pour que le pilote b&g Network (APC2) ne se mette pas en "NO SPD" quand le speedo est à 0 (Speedo bloqué ou en dessous de 1,5nd)!
Merci.
erwann- Messages : 51
Date d'inscription : 25/08/2019
Localisation : Tanger
Modèle de bateau : Oceanis 411 1998 2 cabines
Re: Pilote b&g Network NO SPD
Bonjour,
A part passer en SOG (vitesse fond) au lieu de BSP (vitesse surface) je ne vois pas de solution autre que remplacer ou nettoyer la sonde. Le seuil de 1.5 noeud peut-il être abaissé?
Trouvé dans un manuel utilisateur pour B&G ACP2:
Speed Set-Up (SPEED)
The SPEED set-up allows the source used for speed data to be selected. There are three options available:
(a) B SPD - Boat speed from a speed sensor (default).
(b) SOG - Speed Over Ground from NMEA device.
(c) F SPD - Fixed speed entered by the user.
Les instructions de dépannage sont assez basiques:
NO SPD NO BOAT SPEED
Fault description: The boat is stationary or moving very slowly (less than 1.5 kts) or the speed sensor is not working.
Check list:
1. If boat speed for pilot comes from instrument system, check speed shown on instrument system display.
2. If boat speed connected directly to pilot, check connections.
3. Check boat speed sensor for correct operation.
A part passer en SOG (vitesse fond) au lieu de BSP (vitesse surface) je ne vois pas de solution autre que remplacer ou nettoyer la sonde. Le seuil de 1.5 noeud peut-il être abaissé?
Trouvé dans un manuel utilisateur pour B&G ACP2:
Speed Set-Up (SPEED)
The SPEED set-up allows the source used for speed data to be selected. There are three options available:
(a) B SPD - Boat speed from a speed sensor (default).
(b) SOG - Speed Over Ground from NMEA device.
(c) F SPD - Fixed speed entered by the user.
Les instructions de dépannage sont assez basiques:
NO SPD NO BOAT SPEED
Fault description: The boat is stationary or moving very slowly (less than 1.5 kts) or the speed sensor is not working.
Check list:
1. If boat speed for pilot comes from instrument system, check speed shown on instrument system display.
2. If boat speed connected directly to pilot, check connections.
3. Check boat speed sensor for correct operation.
_________________
Xuân - Océanis 48 - mai 2017
Bertrand- Messages : 768
Date d'inscription : 01/10/2017
Age : 73
Localisation : La Rochelle
Modèle de bateau : Océanis 48 GTE - mai 2017
Re: Pilote b&g Network NO SPD
Désolé Bertrand j'avais bien lu ta réponse en retour mais je m'aperçois que je ne t'avais pas remercier!
Alors MERCI Bertrand :-)
Alors MERCI Bertrand :-)
erwann- Messages : 51
Date d'inscription : 25/08/2019
Localisation : Tanger
Modèle de bateau : Oceanis 411 1998 2 cabines
Re: Pilote b&g Network NO SPD
@erwann
Pas de problème! As-tu trouvé une solution?
Pas de problème! As-tu trouvé une solution?
_________________
Xuân - Océanis 48 - mai 2017
Bertrand- Messages : 768
Date d'inscription : 01/10/2017
Age : 73
Localisation : La Rochelle
Modèle de bateau : Océanis 48 GTE - mai 2017
erwann- Messages : 51
Date d'inscription : 25/08/2019
Localisation : Tanger
Modèle de bateau : Oceanis 411 1998 2 cabines
Sujets similaires
» Maintenance Pilote B&G Network ACP
» Recherche cadran speed et sondeur network
» Connexions centrale navigation B§G network / traceur LCD ELITE NB
» B&G Network NMEA 0183 sur Digital YACHT IKONVERT
» Problème pilote B&G erreur RUD DRV
» Recherche cadran speed et sondeur network
» Connexions centrale navigation B§G network / traceur LCD ELITE NB
» B&G Network NMEA 0183 sur Digital YACHT IKONVERT
» Problème pilote B&G erreur RUD DRV
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|